|
Anaesthetic Circuits |
Vetrica Never Uses Re-breathing Circuits
This is an anaesthetic gas circuit. It is what actually delivers the anaesthetic gases to the patient. The circuit shown here is called a "To-And-Fro", and is a type of circuit called a re-breather, so called because the patient re-breathes its own exhaled air. The clear plastic canister (shown empty) is filled with soda-lime, which the animal breathes through into the black rubber bag. The function of the soda-lime is to absorb carbon dioxide present in the patient's exhaled breath, allowing the remaining gases to be re-used. This reduces the total quantity of anaesthetic gases required very considerably, hence reducing the cost. However, there are many problems with these types of circuits.
Vetrica does not use re-breathing circuits.
This picture shows a circuit called a Parallel Lack. This circuit does not allow the re-breathing of exhaled breath by the patient. Gas flows into the patient along one tube, and out along a different tube. This parallel, wide-bore tube system makes the resistance to air flow as low as possible. Low resistance to air flow minimises the risk to the patient from depressed respiration due to anaesthesia. There is no soda-lime to breathe through, or to irritate the airways, and crucially, the settings of the anaesthetic machine accurately match the composition of the gas being breathed in by the patient.
Copyright ©Vetrica 2002 all rights reserved. |
|
|
|